Scan Tool Data List
Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Instrument Panel Module (IPM) Operating Conditions: Ignition ON, Engine OFF |
|||
| Steering Wheel Controls Return | Inputs | Counts | Varies |
| Battery Voltage Signal | Load Management | Volts | 12.5 |
| Accessory Relay Status | Outputs | On/Off | On |
| Run Relay Status | Outputs | On/Off | On |
| Run/Crank Relay Status | Outputs | On/Off | On |
| Start LED Duty Cycle | Outputs | % | Varies |
| Accessory LED Duty Cycle | Outputs | % | Varies |
| OFF LED Duty Cycle | Outputs | % | Varies |
| Rear Integration Module (RIM) Operating Conditions: Ignition ON, Engine OFF |
|||
| Battery Voltage Signal | Data | Volts | 12.5 |
| Run/Crank Terminal Status | Inputs | Active/Inactive | Active |
| Sunroof Enable Command | Outputs | Enable/Disabled | Enable |
| Remote Control Door Lock Receiver (RCDLR) Operating Conditions: Ignition ON, Engine OFF |
|||
| Battery Voltage Signal | Data | Volts | 12.5 |
| Ignition Mode Switch | Data | Volts | 12.5 |
| Ignition Mode Switch | Data | Idle, ACC/OFF, Run | Idle |
| Ignition Switch Fault | Data | No/Yes | No |
| Invalid Power Moding | Data | No/Yes | No |
| Back up Power Moding | Data | Inactive/Active | Inactive |
| Run/Crank Relay Command | Data | On/Off | Off |
| Run/Crank Relay Status | Data | On/Off | On |
| Driver/Passenger Door Module (DDM/PDM) Operating Conditions: Ignition ON, Engine OFF |
|||
| Door Ajar Switch | Data | Door Closed/Door Ajar | Door Closed |