FixVault
Home › Cadillac › 2006 › STS V › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.4L - Introduction (2 Of 2) › Repair Instructions › Barometric Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: BARO, MAP & SCIAP Sensors
    GM1613998Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
  3. Disconnect the barometric pressure (BARO) sensor (2) electrical connector.
    4. IMPORTANT: The BARO sensor does not use a vacuum line.
  4. Remove the BARO sensor (2) from the bracket.
About FixVault