FixVault
Home › Cadillac › 2006 › STS V › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.4L - DTC P0010 To P0175 › DTC P0111 › Circuit/System Verification

Circuit/System Verification

IMPORTANT: Perform this verification procedure only if the ignition has been OFF for 8 hours or more.
  1. Ignition ON, observe the scan tool IAT Sensor, IAT Sensor 2, and ECT Sensor parameters. The readings should be within 15°C (27°F) of each other and also the ambient temperature.
  2. Engine running, observe the DTC information with a scan tool. DTC P0111 should not set.
  3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
About FixVault