FixVault
Home › Cadillac › 2006 › XLR Base › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Head Up Display Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of HUD Switch Assembly
    GM1224608Courtesy of GENERAL MOTORS CORP.
  1. Install the HUD switch to the I/P cluster bezel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the HUD switch retaining screws.

    Tighten:  Tighten the screws to 1.5 N.m (13 lb in).

  3. Connect the I/P dimmer/HUD switch electrical connector.
  4. Install the HUD switch assembly to the I/P.

    Tighten:  Tighten the screws to 1.5 N.m (13 lb in).

  5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
About FixVault