FixVault
Home › Cadillac › 2006 › XLR V › Repair and Diagnosis › Engine Performance › System › Engine Controls - 4.4L - Introduction (2 Of 2) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of EVAP Canister Access Cover In Right Rear Wheelhouse
    GM561137Courtesy of GENERAL MOTORS CORP.
  1. Remove the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Liner Panel Replacement .
  2. Remove the evaporative emission (EVAP) canister access cover.
    3. Fig 2: Fuel Tank Pressure Sensor Electrical Connector
    GM1767511Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the fuel tank pressure sensor electrical connector (1) located on the right side fuel tank module.
    4. Fig 3: Fuel Tank Pressure Sensor
    GM1767512Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel tank pressure sensor (2) by carefully prying the sensor out of the fuel tank.
About FixVault