FixVault

Installation Procedure

    Fig 1: Removing & Installing TV Antenna Module
    GM705968Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the TV module (1) to the rear shelf.
  2. Install the fasteners securing the TV module to the rear shelf.

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

  3. Fig 2: Identifying Coax Cables
    GM705966Courtesy of GENERAL MOTORS CORP.
  4. Connect the coax cables (3) to the TV module.
  5. Fig 3: Locating TV Module Electrical Connector
    GM705965Courtesy of GENERAL MOTORS CORP.
  6. Connect the electrical connector (1).
  7. Reinstall the rear shelf. Refer to Trim Panel Replacement - Rear Window Shelf .