FixVault
Home › Cadillac › 2007 › CTS V › Repair and Diagnosis › Body & Frame › Windows › Fixed & MOVEABLE Window Systems › Repair Instructions › Front Side Door Window Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Front Window Regulator Clamp
    GM758771Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The window regulator should be at least 1/2 way down before installing the window.
  1. Install the window down into the door.
  2. Locate the window into the 2 window regulator clamps.
    3. IMPORTANT: Start the vehicle to ensure maximum power to the window motor. This is required in order to fully seat the window for adjustment.
  3. Start the vehicle.
    4. NOTE: Refer to Fastener Notice .
  4. Using the power window switch, raise the window to the fully closed position.

    Tighten:  Tighten the window clamp nuts to 11 N.m (98 lb in).

  5. Install the window inner belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner .
  6. Inspect for proper window operation and a tight seal.
  7. Shut off the vehicle.
  8. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  9. Install the door control module. Refer to Door Control Module Replacement .
  10. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
About FixVault