FixVault
Home › Cadillac › 2007 › DTS 4.6 9 › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Engine Ground Cable Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Rear Generator Bolt & Ground Cable
    GM1669928Courtesy of GENERAL MOTORS CORP.
  1. Position the engine ground cable to the generator.
    2. NOTE: Refer to Fastener Notice .
  2. Install the rear generator bolt.

    Tighten:  Tighten the bolt to 50 N.m (37 lb ft).

    3. Fig 2: Identifying Engine Ground Cable
    GM1664485Courtesy of GENERAL MOTORS CORP.
  3. Install the bolt (1) securing the engine ground cable (2) to the right side body frame rail.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  4. Install the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .
About FixVault