Amplifier Replacement (Cadillac)

Fig 1: View Of Radio Speaker Amplifier Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the floor console bezel. Refer to Floor Console Bezel Replacement (Cadillac) or Floor Console Bezel Replacement (Except Cadillac) . Remove instrument panel lower center trim panels. Refer to Trim Replacement - Instrument Panel (I/P) Lower Center (Cadillac) .
1	Front Floor Console Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Floor Console Rear Screw (Qty: 2) Tighten: 2 N.m (18 lb in) Tip: Open the rear cupholder to access the screws.
3	Front Floor Console Lower Screw (Qty: 4) Tighten: 9 N.m (80 lb in) Tip: Move the seats forward or rearward to access the screws as needed. Rotate the upper portion of the console assembly rearward to access the amplifier.
4	Amplifier Screw (Qty: 4) Tighten: 9 N.m (80 lb in)
5	Radio Speaker Amplifier Assembly Tip: Disconnect the electrical connectors.