FixVault
Home › Cadillac › 2007 › Escalade EXT › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Diagnostic Information and Procedures › DTC P0562 › Circuit/System Testing

Circuit/System Testing

  1. Measure the voltage at the battery terminals and compare it with the Ignition 1 Signal parameter in the ECM data list. Verify that battery and Ignition 1 signal readings do not differ more than 1 volt.
    • If greater than 1 volt test the Ignition 1, ground circuits of the ECM for open/high resistance or replace the ECM.
  2. Go to Charging System Test .
About FixVault