FixVault
Home › Cadillac › 2007 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1079 (Object Detection System) › Diagnostic Information and Procedures › DTC B0968 › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Sensor Voltage Feed Output parameter. The reading should be between 8.0-9.0 volts.
  2. Perform the LED Test, using the scan tool. Observe the operation of the three LEDs. All three LEDs should illuminate.
About FixVault