FixVault
Home › Cadillac › 2007 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1171 (Disc Brake System) › Repair Instructions › Front Brake Shield Replacement (AWD) › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Dust Caution .
    Fig 1: View of Brake Shield
    GM1969916Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the wheel speed sensor. Refer to Front Wheel Speed Sensor Replacement (RWD) or Front Wheel Speed Sensor Replacement (AWD) .
  4. Remove the front wheel bearing and hub assembly. Refer to Front Wheel Bearing and Hub Replacement (AWD) or Front Wheel Bearing and Hub Replacement (RWD) .
  5. Remove the front brake shield (1).
About FixVault