Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Positioning Mirror Face On Mirror Housing

Courtesy of GENERAL MOTORS CORP.

Position the mirror face on a angle to the mirror housing.

Fig 2: Pushing Downward & Inward To Lock Glass In Place

Courtesy of GENERAL MOTORS CORP.

Install the mirror face as follows:
1. Holding the mirror face, connect the electrical connectors to the back of the mirror.
2. Position the mirror face to the motor retainer tabs.
3. Position the hand in the center of the mirror face.
4. Apply light pressure to the face.
5. Push downward and inward to lock in place.
6. Inspect the mirror face for proper operation.