Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the left front wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Remove the left front wheelhouse liner (1). Refer to Front Wheelhouse Liner Replacement - Left Side .
- Disconnect the washer pump hoses (1, 2) from the left side fender flange. Refer to Windshield Washer Hose Replacement .
- Drain the windshield washer solvent into a suitable container.
- Disconnect the electrical connectors.
- Lower the vehicle in order to access the hood latch.
- Open the hood.
- Remove the windshield washer solvent cap.
- Remove the auxiliary battery tray, if equipped. Refer to Auxiliary Battery Tray Replacement .
- Remove the battery tray, if working on a HYBRID (HP2). Refer to Battery Tray Replacement .
- Remove the upper windshield washer container bolt from under the auxiliary battery tray, if equipped.
- Remove the upper windshield washer solvent container bolts (1).
- Remove the windshield washer solvent container assembly (2).
NOTE:
Remove the washer container from the underside of the vehicle through the wheelhouse opening.