Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the battery tray.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices
Install the battery tray bolts (1) to the battery tray support.

Fig 1: View Of Battery Tray & Bolts At Battery Tray Support
Courtesy of GENERAL MOTORS CORP.

Tighten: Tighten the bolts to 9 N.m (80 lb in).
Install the battery tray bolts (1) to the fender inner panel.

Fig 2: View Of Battery Tray & Bolts At Fender Inner Panel
Courtesy of GENERAL MOTORS CORP.

Tighten: Tighten the bolts to 9 N.m (80 lb in).
Install the battery tray bolts (2) to the battery tray reinforcement.

Fig 3: View Of Battery Tray Reinforcement & Bolts
Courtesy of GENERAL MOTORS CORP.

Tighten: Tighten the bolts to 9 N.m (80 lb in).
Install the battery. Refer to Battery Replacement .