Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the PTO switch to the housing

Fig 1: Installing PTO Switch Into I/P Switch Housing
Courtesy of GENERAL MOTORS CORP.
Connect the wire connector to the switch.
Install the switch housing to the I/P till it clicks into place.
Install the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.