FixVault
Home › Cadillac › 2007 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 699 (Frame And Underbody) › Repair Instructions › Transmission Support Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transmission Crossmember
    GM702036Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission support to the frame. (15 series)
    2. Fig 2: Identifying Crossmember & Bolts
    GM652595Courtesy of GENERAL MOTORS CORP.
  2. Install the transmission support to the frame. (25/35 series)
    3. NOTE: Refer to FASTENER NOTICES .
  3. Install the bolts and the nuts in order to retain the transmission support to the frame.

    Tighten:  Tighten the nuts to 95 N.m (70 lb ft).

  4. Lower the rear of the transmission.
    5. Fig 3: Identifying Transmission Mount Nuts
    GM647997Courtesy of GENERAL MOTORS CORP.
  5. Install the transmission mount to the transmission support.
  6. Install the nuts in order to retain the transmission mount to the transmission support.

    Tighten:  Tighten the nuts to 40 N.m (30 lb ft).

  7. Remove the transmission jack.
  8. Lower the vehicle.
About FixVault