FixVault
Home › Cadillac › 2007 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 722 (HVAC Systems - Manual) › Repair Instructions › HVAC Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster trim plate bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
  2. Remove the instrument panel storage tray.
  3. Remove the accessory switch assembly from the instrument panel. Refer to Accessory Switch Replacement in Instrument Panel, Gages, and Console.
  4. Remove the screws from the HVAC control assembly.
  5. Remove the HVAC control assembly, with the following procedure:
    Fig 1: Removing HVAC Control Assembly
    GM363018Courtesy of GENERAL MOTORS CORP.
    1. Release the retaining tabs.
    2. Pull the control head out of the instrument panel carrier.
  6. Disconnect the electrical connectors from the HVAC control assembly.
About FixVault