Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Rear Spring Hanger Bracket Nut And Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the shackle to the spring.
Install the shackle nut and bolt to the spring.
Tighten: Tighten the shackle nut to 95 N.m (70 lb ft).
Install the leaf spring assembly to the vehicle. Refer to Leaf Spring Replacement .
Remove the safety stands.
Lower the vehicle.