Stub Shaft Housing Replacement
Stub Shaft Housing Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedures: Remove the power steering gear. Refer to Power Steering Gear Replacement (Rack and Pinion) or Power Steering Gear Replacement (Non Rack and Pinion) . |
|
| 1 | Stub Shaft Housing Bolt (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 62 N.m (46 lb ft) |
| 2 | Stub Shaft Housing |
| 3 | Stub Shaft Housing O-Ring (Qty: 2) Tip: Grease the stub shaft seals with the special grease supplied in the service kit. |