FixVault
Home › Cadillac › 2007 › SRX 3.6 7, AWD › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Object Alarm Module Replacement (W/O TB5) › Removal Procedure

Removal Procedure

  1. Remove the left rear body side trim. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) .
    Fig 1: View Of RPA Module Electrical Connector
    GM1210898Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the RPA module electrical connector (1).
    Fig 2: View Of RPA Module
    GM1210903Courtesy of GENERAL MOTORS CORP.
  3. Remove the RPA module.
About FixVault