Installation Procedure

Complete the following in order to install the fuel level sensor (1) to the module assembly:
1. Align the tabs of the sensor (1) with the slots in the module assembly.
2. Slide the sensor (1) fully into position, ensure the locking tab (2) is engaged.
Fig 1: View Of Fuel Level Sensor & Locking Tab
Courtesy of GENERAL MOTORS CORP.
Connect the fuel level sensor electrical connector (1) to the module.

Fig 2: View Of Primary Fuel Level Sensor Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Install the primary fuel tank module. Refer to Primary Fuel Tank Module Replacement .