Rear Toe Adjustment

WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Link Jam Nuts & Turnbuckle

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Complete the left and right rear toe adjustments separately, per wheel. Use the following procedure:

Loosen the adjustment link jam nuts (1).

NOTE: Refer to Fastener Notice .

In order to adjust the toe, rotate the turnbuckle (2).
Tighten: Tighten the jam nuts to 75 N.m (55 lb ft).
Recheck the toe setting after tightening.
Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications .