FixVault

Installation Procedure

WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
  2. Install the outside moisture sensor, if equipped. Refer to Windshield Outside Moisture Sensor Replacement .
  3. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  4. Install the interior windshield garnish moldings. Refer to Windshield Side Garnish Molding Replacement .
  5. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  6. Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement .
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  8. Close the hood.