FixVault
Home › Cadillac › 2007 › STS V › Repair and Diagnosis › External Pages › Different car › Section 7 (Wiper System & Washer System) › Repair Instructions › Windshield Wiper System Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper motor mini 10 A and 30 A fuses. The wiper motor fuses are located in the underhood fuse block.
  2. Remove the wiper arm assemblies. Refer to Windshield Wiper Arm Replacement .
  3. Remove the air inlet grille (1,3). Refer to Air Inlet Grille Panel Replacement in Body Front End.
    4. Fig 1: Wiper Transmission View
    GM776830Courtesy of GENERAL MOTORS CORP.
  4. Remove the wiper motor module mounting bolts (3,5).
  5. Disconnect the wiper motor electrical connector (4).
  6. Remove the wiper motor module (1) from the vehicle.
About FixVault