FixVault
Home › Cadillac › 2007 › STS V › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Cooler Pipe/Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Power Steering Cooling Lines
    GM1371688Courtesy of GENERAL MOTORS CORP.
  1. Position the power steering cooler pipe/hose to the vehicle.
  2. Connect the power steering cooler pipe/hose to the power steering cooler.
    NOTE: Refer to Fastener Notice .
    3. Fig 2: View Of Power Steering Cooler Pipe/Hose-To-Frame Retaining Bolt
    GM1371689Courtesy of GENERAL MOTORS CORP.
  3. Install the power steering cooler pipe/hose to frame retaining bolt.

    Tighten:  Tighten the bolts to 10 N.m (88 lb in).

    4. Fig 3: View Of Power Steering Cooler Pipe/Hose & Power Steering Lines
    GM1371691Courtesy of GENERAL MOTORS CORP.
  4. Connect the power steering cooler pipe/hose to the power steering lines.
  5. Install the front air deflector. Refer to Front Air Deflector Replacement .
  6. Lower the vehicle.
  7. Remove the drain pan from under the vehicle.
  8. Bleed the power steering system. Refer to Power Steering System Bleeding .
About FixVault