FixVault
Home › Cadillac › 2007 › XLR Base › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Object Alarm Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the trim assembly from the rear compartment panel stowage. Refer to Body Rear Compartment Replacement .
    2. Fig 1: View Of Rear Object Alarm Detection Module & Nuts
    GM1269130Courtesy of GENERAL MOTORS CORP.
  2. Remove the nuts from the rear object alarm detection module.
  3. Disconnect the electrical connector.
  4. Remove the module.
About FixVault