FixVault

Removal Procedure

  1. Remove the door trim panel. Refer to Door Trim Panel Replacement .
  2. Fig 1: Mirror Wire Harness & Electrical Connector
    GM164499Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector to the mirror wire harness.
  4. Remove the mirror face. Refer to Mirror Face Replacement .
  5. Remove the screws from the mirror motor.
  6. Pull the motor electrical harness through the mirror housing.
  7. Fig 2: View Of Outside Rearview Mirror Motor
    GM742277Courtesy of GENERAL MOTORS CORP.
  8. Remove the motor from the mirror housing.