FixVault
Home › Cadillac › 2007 › XLR Base › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Exhaust Tail Pipe Flow Valve Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Exhaust Tail Pipe Flow Valve Control Module
    GM1688226Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust tail pipe flow valve control module.
  2. Attach the exhaust tail pipe flow valve control module using a new piece of two-sided tape.
    3. Fig 2: Identifying Exhaust Tail Pipe Flow Valve Control Module Connector
    GM1688227Courtesy of GENERAL MOTORS CORP.
  3. Connect both electrical connectors.
  4. Install the battery.
  5. Refer to Control Module References for programming and setup information.
About FixVault