FixVault
Home › Cadillac › 2007 › XLR Base › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Exhaust Tail Pipe Flow Valve Control Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the battery.
    2. Fig 1: Identifying Exhaust Tail Pipe Flow Valve Control Module Connector
    GM1688227Courtesy of GENERAL MOTORS CORP.
  2. Disconnect both electrical connectors.
  3. Detach the exhaust tail pipe flow valve control module by pulling off two-sided tape.
    4. Fig 2: Identifying Exhaust Tail Pipe Flow Valve Control Module
    GM1688226Courtesy of GENERAL MOTORS CORP.
  4. Remove the exhaust tail pipe flow valve control module.
About FixVault