Installation Procedure
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the license lamp bulb into the socket if replacing.
- Install the license lamp socket into the lamp assembly by inserting the socket and turning the socket clockwise.
- Install the license lamp (1) to the liftgate applique by sliding the lamp into the applique until an audible click is heard.
- Install the liftgate applique to the rear compartment lid. Refer to Liftgate Applique Replacement .
- Close the lift gate.