Removal Procedure
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LH2 (LHD)) or Battery Negative Cable Replacement (LH2 (RHD)) or Battery Negative Cable Replacement (LY7 (LHD)) or Battery Negative Cable Replacement (LY7 (RHD)) .
- Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
- Squeeze the negative battery cable branches together.
- Slide the battery current sensor (1) off of the negative battery cable.
IMPORTANT:
Note the position of the battery current sensor prior to removal.