FixVault
Home › Cadillac › 2007 › XLR Base › Repair and Diagnosis › External Pages › Different car › Section 65 (Object Detection System) › Repair Instructions › Information Center Telltale Assembly Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull downward on the front of the rear park assist (RPA) bezel in order to release the retaining clips (3).
    Fig 1: View Of Information Center Telltale Assembly
    GM1233599Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (2).
  3. Remove the RPA tell tale indicator from the bezel.
About FixVault