Circuit/System Verification

Verify that DTCs P0411, P0418, P0641, P0651, P2432 or P2433 are not set.
- If any of the DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
Ignition ON, observe that the AIR pump is not activated.
- If the AIR pump is operating, test the AIR pump voltage supply circuit for a short to voltage. If the circuit tests normal, test the AIR pump relay control circuit for a short to ground. If the circuits test normal, test the AIR pump relay. If the relay and circuits test normal, replace the control module.
Ignition ON, enable and disable the AIR pump relay with a scan tool, listen for the AIR pump to turn ON and OFF.
Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.