Cruise Control Module with Distance Sensing Scan Tool Information
Cruise Control Module with Distance Sensing Scan Tool Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: The ignition is ON / The engine is OFF / Vehicle is in Park or Neutral / Cruise On / Off Switch is Turned OFF | |||
| Clean Radar Indicator Message | - | Off | The scan tool displays On / Off. This is the state of the clean radar indicator message as commanded by the distance sensing cruise control (DSCC) module. |
| Cruise On / Off Switch | - | Active | The scan tool displays On / Off. This is the state of the cruise control On/Off switch as detected by the ECM. |
| Driver Throttle Override Status | - | Inactive | The scan tool displays Active / Inactive. The ECM monitors the throttle and reports a throttle override condition initiated by the driver. |
| Service Radar Indicator Message | - | Off | The scan tool displays On / Off. This is the state of the service radar indicator as commanded by the DSCC module. |
| Target Found this Ignition Cycle | - | No | The scan tool displays Yes / No. The radar scans the road environment to detect the presence of a vehicle in its path. Yes is displayed if a target is acquired. |
| Vehicle Ahead Indicator Message | - | Off | The scan tool displays On / Off. This is the state of the vehicle ahead indicator as commanded by the DSCC module. |