FixVault
Home › Cadillac › 2008 › Escalade EXT › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System & Remote Functions › Diagnostic Information and Procedures › DTC B1008 › Circuit/System Verification

Circuit/System Verification

  1. Perform the RCDLR Programming and Setup procedure. Refer to Remote Control Door Lock Receiver Programming and Setup .
  2. Operate the vehicle within the Condition for Running the DTC and verify the DTC does not reset.
    • If the DTC resets, replace the RCDLR.
About FixVault