FixVault
Home › Cadillac › 2008 › XLR V › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 4.4L - Introduction › Repair Instructions › Air Cleaner Assembly Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Air Cleaner Assembly
    GM1685809Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector.
  2. Remove the MAF/IAT sensor if necessary. Refer to Mass Airflow Sensor/Intake Air Temperature Sensor Replacement .
  3. Loosen the air cleaner outlet duct clamp at the supercharger inlet duct.
  4. Remove the air cleaner housing from the vehicle.
  5. Remove the air cleaner housing splash shields, if necessary.
About FixVault