FixVault
Home › Cadillac › 2008 › XLR V › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 4.4L - DTC P0010 To DTC P0158 › DTC P0033 › Component Testing › Dynamic Test

Dynamic Test

  1. Install a 3A fused jumper wire between the ignition supply circuit terminal and 12 volts. Install a jumper wire between the control terminal and ground.
  2. Toggle the jumper wire between the control terminal and ground.
  3. Feel and listen for the operation of the SCB solenoid.
    • If the function does not perform as specified, replace the SCB solenoid.
About FixVault