FixVault
Home › Cadillac › 2009 › DTS 4.6 Y › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Front Object Alarm Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Object Sensor
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Disconnect electrical from the front object sensor.
  3. Lift the locking tabs on the housing and remove the front object sensor.
About FixVault