FixVault
Home › Cadillac › 2009 › Escalade EXT › Repair and Diagnosis › Drivelines & Axles › Differentials & Drive Axles › Front Drive Axle › Repair Instructions › Front Axle Lubricant Replacement › Installation Procedure

Installation Procedure

    Fig 1: Front Drive Axle Lubricant Drain Plug
    GM834237Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the drain plug and tighten to 33 N.m (24 lb ft).
  2. Fill the differential carrier assembly with axle lubricant. Use the correct fluid. Refer to Approximate Fluid Capacities . Adhesives, Fluids, Lubricants, and Sealers .
  3. Install the fill plug and tighten to 33 N.m (24 lb ft).
  4. Install the front differential carrier shield, if equipped. Refer to Shield Replacement .
  5. Lower the vehicle.
About FixVault