USB Receptacle Replacement (Without SLT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: USB Electrical Connector (Without SLT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Cadillac) or Instrument Panel Accessory Trim Plate Replacement (Except Cadillac)
1	USB Receptacle Procedure Disconnect the electrical connector. Release the tabs and gently remove the receptacle by pushing forward from the trim plate.

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Cadillac) or Instrument Panel Accessory Trim Plate Replacement (Except Cadillac)

USB Receptacle

Procedure

Disconnect the electrical connector.
Release the tabs and gently remove the receptacle by pushing forward from the trim plate.