Blower Motor Control Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Blower Motor Control Module & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the I/P insulator panel. Refer to Instrument Panel Insulator Replacement (Cadillac) or Instrument Panel Insulator Replacement (Except Cadillac) . Disconnect the blower motor control module electrical connector.
1	Blower Motor Control Module Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 1.5 N.m (13 lb in)
2	Blower Motor Control Module

Callout

Component Name

Preliminary Procedure

Remove the I/P insulator panel. Refer to Instrument Panel Insulator Replacement (Cadillac) or Instrument Panel Insulator Replacement (Except Cadillac) .
Disconnect the blower motor control module electrical connector.

Blower Motor Control Module Screw (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 1.5 N.m (13 lb in)

Blower Motor Control Module