FixVault

Auxiliary Blower Control Module Replacement

Fig 1: Locating Auxiliary Blower Control Module
GM1681989Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Standard Wheelbase) or Rear Quarter Trim Panel Replacement - Right Side (Extended Wheelbase) .
  2. Disconnect the blower motor control module electrical connector.
1 Screw, Blower Motor Resistor (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  1.5 N.m (13 lb in)

2 Module, Blower Motor Control