FixVault
Home › Cadillac › 2009 › SRX 4.6 A, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 4.6L - Introduction › Repair Instructions › Ignition Coil Replacement - Bank 1 › Installation Procedure

Installation Procedure

    Fig 1: View Of Ignition Coils
    GM1283865Courtesy of GENERAL MOTORS CORP.
    NOTE: Ensure that the spark plug seals are in place when installing the ignition coil.
  1. Install the ignition coil.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the ignition coil retaining bolt and tighten to 10 N.m (89 lb in).
  3. Reconnect the ignition coil electrical connector.
    4. Fig 2: View Of Ignition Coil Cover - Bank 1
    GM1235151Courtesy of GENERAL MOTORS CORP.
  4. Install the ignition coil cover to the cam cover.
  5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
About FixVault