FixVault
Home › Cadillac › 2009 › STS V › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 4.4L - Introduction › Repair Instructions › Intake Air Temperature (IAT) Sensor 2 Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Intake Air Temperature (IAT) Sensor Connector
    GM1645247Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold sight shield. Refer to Intake Manifold Sight Shield Replacement .
  2. Disconnect the intake air temperature (IAT) sensor 2 electrical connector.
    3. Fig 2: Locating Intake Air Temperature (IAT) Sensor
    GM1613989Courtesy of GENERAL MOTORS CORP.
  3. Remove the IAT sensor 2 (1).
About FixVault