FixVault
Home › Cadillac › 2009 › STS V › Repair and Diagnosis › External Pages › Different car › Section 243 (Battery, Charging System And Starting System) › Repair Instructions › Battery Current Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the tape tab is pointing away from the battery prior to installation.
  1. Slide the NEW battery current sensor (1) up onto the negative battery cable.
  2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement (LY7 - LHD)  or Battery Negative Cable Replacement (LY7 - RHD)  or Battery Negative Cable Replacement (LH2 - LHD)  or Battery Negative Cable Replacement (LH2 - RHD) .
About FixVault