FixVault
Home › Cadillac › 2009 › STS V › Repair and Diagnosis › External Pages › Different car › Section 249 (Front Suspension System) › Repair Instructions › Stabilizer Shaft Insulator Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation .
    Fig 1: View Of Stabilizer Shaft Link-To-Stabilizer Shaft Retaining Nuts
    GM874638Courtesy of GENERAL MOTORS CORP.
  3. Remove stabilizer shaft link to stabilizer shaft retaining nut.
  4. Separate the stabilizer shaft link from the stabilizer shaft.
  5. Remove the stabilizer shaft bracket mounting bolts.
  6. Remove the stabilizer shaft bracket.
  7. Remove the stabilizer shaft insulator.
About FixVault