FixVault
Home › Cadillac › 2009 › XLR Base › Repair and Diagnosis › Body & Frame › Seats › Power Seat System › Repair Instructions › Lumbar Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove the seat outer finish panel. Refer to Driver Seat Outer Finish Panel Replacement .
    2. Fig 1: View Of Finish Panel Bottom
    GM1247980Courtesy of GENERAL MOTORS CORP.
  2. Use a small flat-bladed tool to release the switch from the finish panel. Remove the switch.
    3. Fig 2: View Of Lumbar Switch & Electrical Connector
    GM1248787Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector to the lumbar switch.
About FixVault