FixVault
Home › Cadillac › 2009 › XLR Base › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Repair Instructions › Cooling Fan Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Cooling Fan Control Module
    GM1500602Courtesy of GENERAL MOTORS CORP.
  1. Install the cooling fan control module to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the cooling fan control module retaining bolt and tighten to 6 N.m (53 lb in).
    3. Fig 2: View Of Cooling Fan Control Module Electrical Connector
    GM1500599Courtesy of GENERAL MOTORS CORP.
  3. Connect the cooling fan control module electrical connector.
  4. Lower the vehicle.
  5. Refer to Control Module References for programming and setup information.
About FixVault