FixVault
Home › Cadillac › 2009 › XLR Base › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 4.6L (LH2) - Introduction, Specifications & Repair Instructions › Repair Instructions › Fuel Level Sensor Replacement - Right Side › Removal Procedure

Removal Procedure

  1. Remove the module from the fuel tank. Refer to Fuel Tank Replacement - Right Side .
  2. Press on the connector position assurance (CPA) with thumb and slide toward downward.
  3. Disconnect the electrical connector from the module.
  4. Remove the sender wires from the electrical connector.
  5. Push in the lock tab above the level sender body and slide the level sender out of the slot.
  6. Remove the level sender from the module. Ensure wires are routed into the slot in the back of the level sender body.
About FixVault